Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Free Returns
100% Satisfaction Guaranteed
Lifetime Support
With Extended Warranties
Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Lifetime Support
With Extended Warranties
Home > CO2 Diffusers > Bazooka Atomizer CO2 Diffusers > Bazooka Atomizer CO2 Diffuser - 70mm For Aquariums Up To 300l

70mm Bazooka Atomizer CO2 Diffuser For Aquariums Up To 300L

£27.99
Bazooka Atomizer CO2 Diffuser - 70mm for Aquariums up to 300L
 
 

Key Facts

  • Highly efficient CO2 diffuser.
  • Produces a haze of incredibly small bubbles.
  • Easy to install.
  • This 70mm variety recommended for aquariums up to 300L.
  • Requires 2 bar / 30 PSI pressure to function (provided by all CO2 Supermarket regulators).

Description

The bubbles produced by a Bazooka Atomizer Diffuser are incredibly small (hence the word 'atom' in the product name) and appear almost as a smoke or haze as they exit the diffuser. These incredibly fine bubbles have a much increased surface area compared to one large bubble, and are therefore more readily diffused into the aquarium water.

Using a high quality diffuser, such as the bazooka atomizer, you will find that you can lower your CO2 dosing (bubble count) because a higher level of CO2 diffusion is achieved. This will reduce your running cost because your CO2 cylinder will last longer.

Furthermore, if you position the diffuser under the outflow from the filter then the small bubbles will get caught in the current and remain in suspension longer, thereby giving more time for the CO2 bubbles to diffuse into the aquarium water.

Instructions

  • Unscrew the compression collar and feed tubing through.
  • Push tubing onto inlet of the bazooka diffuser.
  • Using manual force (no tools), tighten the compression collar over the tubing.
  • Press the diffuser onto your aquarium glass using the suction cups.
  • Tip: Position just above substrate below the filter outflow. This will ensure the bubbles enter the flow of water from the filter and hold the CO2 in suspension for longer, increasing CO2 diffusion levels.
  • Tip: If using Polyurethane tubing, warm the tip of the tubing in freshly boiled water to soften it when attaching to the diffuser. This will remove the possibility of any accidental damage.
 

Customer Reviews

Average Rating

Individual Reviews

Javier S. Verified Buyer 12th Nov 2018
Incredibly fine bubbles. You have to wait 5-10 minutes for it to work as in the beginning because of whatever reason very big bubbles appear. But after that 10 mins the bubbles are so fine you can't imagine. For the purists that want to see crystal clear water 100% of the time I'd recommend a reactor, as the bazooka will produce a mist that will be seen until 10-15 minutes after the solenoid goes off read more... Incredibly fine bubbles. You have to wait 5-10 minutes for it to work as in the beginning because of whatever reason very big bubbles appear. But after that 10 mins the bubbles are so fine you can't imagine. For the purists that want to see crystal clear water 100% of the time I'd recommend a reactor, as the bazooka will produce a mist that will be seen until 10-15 minutes after the solenoid goes off (or whatever) but for those who already have a polen glass and are thinking on an inline or a bazooka this is definitely the way to go. I couldn't be more satisfied.
Gareth W. Verified Buyer 17th Oct 2018
Produces a very fine mist of Co2 bubbles. Produces a very fine mist of Co2 bubbles.
Jørgen Sø. Verified Buyer 22nd Sep 2018
Really good, now our co2 is doing very well. Ms. Jørgen Really good, now our co2 is doing very well. Ms. Jørgen
Dave G. Verified Buyer 21st Aug 2018
Great diffuser that produces really small bubbles Great diffuser that produces really small bubbles
Jason C. Verified Buyer 7th Jul 2018
Now I brought a cheap £3.99 glass diffuser and thought that's good, but when I brought this I was blow away! Bubble size when leaving the atomizer is around .2mm by the time they reach the water line they have nearly 100% gone, now that's what we all want 100% no wastage. Now I brought a cheap £3.99 glass diffuser and thought that's good, but when I brought this I was blow away! Bubble size when leaving the atomizer is around .2mm by the time they reach the water line they have nearly 100% gone, now that's what we all want 100% no wastage.
Brian K. Verified Buyer 26th Apr 2018
Really fills the tank with many micro bubbles. Really fills the tank with many micro bubbles.
Rhys E. Verified Buyer 16th Apr 2018
Very effective diffuser, using it on 350 litre tank and DP is lime green Very effective diffuser, using it on 350 litre tank and DP is lime green
Mikael J. Verified Buyer 25th Mar 2018
Good quality and right product Good quality and right product
Ron F. Verified Buyer 7th Jan 2018
Excellent diffuser. Easy to fit and use. Cant fault it. Excellent diffuser. Easy to fit and use. Cant fault it.
John H. Verified Buyer 29th Dec 2017
An excellent product easy to install works well not obtrusive within the tank. An excellent product easy to install works well not obtrusive within the tank.
See more reviews  Loading
Photo of 70mm Bazooka Atomizer for planted aquariums
click image to view full screen

Photo Gallery

Cart Activity

Someone added a product to their cart

View Product

Someone added a product to their cart

View Product