UP Inline Atomizer CO2 Diffuser For 12/16mm Hose

£35.99
UP Inline Atomizer CO2 Diffuser - for 12/16mm Hose
 
 

Key Facts

  • Suitable for 12mm/16mm tubing (12mm internal / 16mm external). Click here for tubing size advice
  • For aquariums up to 500L.
  • Creates a mist of very fine bubbles.
  • Excellent diffusion rates due to high surface area of small bubbles.
  • Bubbles are in the flow of water as it enters the aquarium, so remain in suspension in the water for longer.
  • Diffuser is located outside the aquarium which allows for easy maintenance.
  • No equipment in the aquarium itself.
  • Choose the size for your filter tubing.
  • Requires 2 bar / 30 PSI pressure to function (provided by all CO2 Supermarket regulators).
 

Description

The inline CO2 Atomizer is arguably the most well known product used for CO2 diffusion, and is a firm favourite with planted aquarium specialists around the world. Designed for use with various filter size tubing, this CO2 diffuser sits inline between your filter and the filter outlet, ensuring that the CO2 has as much contact time with the water as possible. As a result, this atomizer dissolves CO2 very efficiently, and provides a stream of very tiny bubbles which exit directly out of your filter outlet. Furthermore, because it is kept outside the aquarium, maintenance is a very easy.

To use this CO2 atomizer, simply connect it, in-line, to your external filter outlet pipe and tighten the nuts. Connect your CO2 regulator to the atomizers CO2 input with air hose tubing and tighten the safety nut. The tiny bubbles that the atomizer produces will then spread evenly around the whole tank, ensuring a uniform spread of CO2.

Instructions

  • Inline atomizers are to be installed on the return / outflow tubing from a filter as the water is reintroduced to the aquarium.
  • Cut or replace your filter tubing with PVC tubing.
  • Push tubing on to each end of the diffuser.
  • Screw the retaining nuts back over the tubing to hold in place.
  • Unscrew the small nut on the CO2 inlet.
  • Feed CO2 tubing through the nut and onto the CO2 inlet.
  • Tighten the nut onto the CO2 inlet to secure the tubing.
  • Turn CO2 on, allow pressure to build within the diffser.
  • Adjust dosing / bubble rate accordingly.
 

Customer Reviews

Average Rating
5
  • J
    John W.
    5

    21st Jul 2024

    Working very well,but does require a lot of pressure. Working very well,but does require a lot of pressure.

  • K
    Kyle G.
    5

    10th Oct 2023

    Makes really small bubbles and I prefer having as much equipment out of the tank as possible so this is a great solution for that. Makes really small bubbles and I prefer having as much equipment out of the tank as possible so this is a great solution for that.

  • M
    Matt W.
    5

    21st Jan 2021

    Really nice piece of equipment Really nice piece of equipment

  • D
    David S.
    5

    19th Sep 2020

    Diffuses gasses well. Easy enough to clean. All good. Diffuses gasses well. Easy enough to clean. All good.

  • J
    Jack S.
    5

    26th May 2020

    100% satisfied. Very high resolution fog. Works perfectly. 100% satisfied. Very high resolution fog. Works perfectly.

  • A
    Andreas T.
    5

    19th Feb 2018

    Truly a game changer. I use with Thrive+ and my tank growth in unbridled. Truly a game changer. I use with Thrive+ and my tank growth in unbridled.

  • K
    Kaloyan I.
    5

    31st Dec 2016

    Very good quality and quick delivery. Very good quality and quick delivery.

  • B
    Brian H.
    5

    25th Jul 2016

    Solid product so far. Very easy to set up. Very fine mist of bubbles, unnoticeable unless looked at close Solid product so far. Very easy to set up. Very fine mist of bubbles, unnoticeable unless looked at close

  • D
    Dan J.
    5

    22nd Feb 2016

    It was easy to install and get up and running, I had bubbles coming out of the filter outlet in less than 10 mins. When I first had it running I had loads of bubbles floating around the tank which I assume where the normal air bubbles as once the CO2 started flowing though you can barely see them. I did have a small issue in that my Dennerle regulator has to be turned up much higher than it did with read more... It was easy to install and get up and running, I had bubbles coming out of the filter outlet in less than 10 mins. When I first had it running I had loads of bubbles floating around the tank which I assume where the normal air bubbles as once the CO2 started flowing though you can barely see them. I did have a small issue in that my Dennerle regulator has to be turned up much higher than it did with a basic diffuser, but after contacting CO2 supermarket I found this was normal. It is so much nicer to be able to have less clutter in my aquarium and would recommend it for that fact alone. I would highly recommend CO2 supermarket as the service was excellent with next day delivery and near instant contact even after hours with questions I had.

  • C
    Cédric Tr.
    5

    20th Feb 2016

    super produit, a un pris raisonnable comparer a ce que l'on peu trouver dans le commerce. super produit, a un pris raisonnable comparer a ce que l'on peu trouver dans le commerce.

See more reviews  Loading

Photo Viewer

Photo of 12/16mm UP Inline Atomizer Diffuser for planted aquariums

Photo Gallery

 
Ask a Question   Log in  
Cart Activity

Someone added a product to their cart

View Product

Someone added a product to their cart

View Product