Regular Mixer Reactor CO2 Diffuser For Aquariums Up To 150L
Key Facts
- For up to 1,000 Litres / Hour flow rate.
- Efficient CO2 diffusion.
- Traps CO2 in the reactor housing until completely diffused into the aquarium water.
- Dual impellers mix the CO2 with water.
- Compact size enables use internally or externally of the aquarium.
- Electricity is not required, since it uses the flow of water from the filter.
- Easy to clean and maintain.
- Will fit 12/16mm and 16/22mm (using spacers). Click here for tubing size advice
- Height: 22cm
- Diameter: 5.5cm
Description
The outlet is located at the bottom of the reactor chamber, and therefore only fully diffused CO2/water exits the device because the CO2 will remain at the top of the unit it is fully diffused. The result is that near 100% CO2 absorption can be achieved.
The reactor will fit 12/16mm tubing, but spacers are also included to enable fitting of 16/22mm tubing.
Instructions
- Reactors are installed on the return / outflow tubing from a filter as the water is reintroduced to the aquarium.
- Cut or replace your filter tubing with PVC tubing.
- Attach filter tubing to corresponding inlet/outlet of the reactor.
- Connect CO2 supply to CO2 inlet of the reactor.
- Turn filter and CO2 on and allow reactor to fill with water.
- Invert (turn upside down) the reactor to eject any trapped air.
- Adjust CO2 rate until desired level of dosing is achieved.
Customer Reviews
Average Rating
-
David M.
22nd Jan 2024
Seems to work well, can't see any bubbles in the tank so mean all the CO2 is being difused in the reactor like its meant to Seems to work well, can't see any bubbles in the tank so mean all the CO2 is being difused in the reactor like its meant to
-
Treeve O.
11th Sep 2023
Works well when set up, watch out for the seal at bottom as it leaked when I first got it. Runs relatively quiet, even when co2 there is only a little water trickle sound. Very little bubbles. Mine is being used on a 40L tank so it works for small tanks too. Works well when set up, watch out for the seal at bottom as it leaked when I first got it. Runs relatively quiet, even when co2 there is only a little water trickle sound. Very little bubbles. Mine is being used on a 40L tank so it works for small tanks too.
-
S Y.
5th Jan 2021
Excellent product. It is very efficient at di9stributing CO2 throughout my aquarium. Excellent product. It is very efficient at di9stributing CO2 throughout my aquarium.
-
Colin R.
18th Oct 2020
Still setting up but seems ok Still setting up but seems ok
-
Peter F.
1st Sep 2017
Quick delivery. Good price. Good instructions and video via YouTube. Thank you. Quick delivery. Good price. Good instructions and video via YouTube. Thank you.
-
Robert
21st Mar 2017
In an attempt to remove as move kit from inside the tank I ordered this to replace my in tank diffuser, Easy to install but you do need to get some clips for feed and return pipes. It was running for 1 few hours but noticed that the rota inside occasionally stuck and it needed a tap to get it to go again. Stripped it down and removed both internal rotas to find that there were ridges left over read more... In an attempt to remove as move kit from inside the tank I ordered this to replace my in tank diffuser, Easy to install but you do need to get some clips for feed and return pipes. It was running for 1 few hours but noticed that the rota inside occasionally stuck and it needed a tap to get it to go again. Stripped it down and removed both internal rotas to find that there were ridges left over from the mold. Used some fine wet/dry sand paper to sand them off, refitted it and it not only runs fine but it's much quieter. Very few bubbles in return to tank so it must be working....
-
John E.
7th Jan 2017
Like it! recommended seller Like it! recommended seller
-
Peter M.
31st Aug 2016
No visible signs of co2 bubbles in my aquarium using this reactor, so no wasted gas now. For the first time I now get lime green all day on my drop checker. As others has said though, the hose connections aren't water tight without hose clips. It is also a little noisy, which may annoy some people. Had the hose connections been better and supplied with a screw/surface type bracket I would give 5 read more... No visible signs of co2 bubbles in my aquarium using this reactor, so no wasted gas now. For the first time I now get lime green all day on my drop checker. As others has said though, the hose connections aren't water tight without hose clips. It is also a little noisy, which may annoy some people. Had the hose connections been better and supplied with a screw/surface type bracket I would give 5 stars. (Suction cups won't stick to wood) Five stars for efficient co2 diffusion.
-
Paul L.
26th Dec 2015
Bought this with suspicion . But what a difference it IS making! I've bought a second one!! Service from CO2 Supermarket is faultless, thank you. Bought this with suspicion . But what a difference it IS making! I've bought a second one!! Service from CO2 Supermarket is faultless, thank you.
-
Robert T.
12th Oct 2015
Works well, traps the CO2 and don't get much coming out. I put some filter foam at the bottom to trap any CO2 trying to escape. Works well, traps the CO2 and don't get much coming out. I put some filter foam at the bottom to trap any CO2 trying to escape.
Photo Viewer
Photo Gallery
Full View
