Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Free Returns
100% Satisfaction Guaranteed
Lifetime Support
With Extended Warranties
Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Lifetime Support
With Extended Warranties
Home > Adapters For CO2 Regulators > Disposable CO2 Cylinder Adapters > Adapter For Disposable CO2 Cylinders

Adapter For Disposable CO2 Cylinders

£12.99
Adapter for Disposable CO2 Cylinders
£1.99
O-Ring Seal for Disposable Cylinder Adapters (2 pack)
 

Key Facts

  • Use disposable CO2 cylinders as your CO2 source.
  • Converts disposable CO2 cylinder thread (M10x1) to DIN477 / JIS m22-14 / BS 341 No. 8 / W21.8-14 / .860" x 1/14 (covers UK, Europe and Asia).
  • Use your existing CO2 regulator without any modification.
  • Robust design and manufacture - will last a lifetime.
  • Easy installation.
 

Description

This adapter will allow you to connect a standard CO2 regulator (with DIN477 / JIS m22-14 / W21.8-14 / .860" x 1/14 nut - covers UK, Europe and Asia) to a dispoable / welding CO2 cylinder. Quick and easy installation.

Disposable CO2 cylinders are readily available from a wide range of retailers, including DIY stores and car maintenance shops, ensuring a supply of CO2 is always easy to obtain.

Instructions

 

Customer Reviews

Average Rating

Individual Reviews

Graham S. Verified Buyer 27th Aug 2020
Good quality material and manufacturing. Good quality material and manufacturing.
Tabriz H. Verified Buyer 19th Jul 2020
Item has a great build quality, I haven't been able to test it out yet as I need to get a CO2 bottle. I can't see there being any issues, it specifies the correct threads required. I would recommend Item has a great build quality, I haven't been able to test it out yet as I need to get a CO2 bottle. I can't see there being any issues, it specifies the correct threads required. I would recommend
Glenn C. Verified Buyer 7th Apr 2020
Excellent fitting for connection to a disposable gas bottle- don’t overtighten bottle though or seal will compress too much and cut of the gas to the regulator. Excellent fitting for connection to a disposable gas bottle- don’t overtighten bottle though or seal will compress too much and cut of the gas to the regulator.
Darren H. Verified Buyer 3rd Apr 2020
Product arrived quicker than expected and as described. Great service will definitely be using for any future products I may need Product arrived quicker than expected and as described. Great service will definitely be using for any future products I may need
Dennis J. Verified Buyer 27th Sep 2019
Worked very well, thanks Den. Worked very well, thanks Den.
James M. Verified Buyer 2nd Apr 2019
Robust and simple enough to use if you follow the instructions. I adopted bad practice from an old system and incurred a problem when dissassembling due to a residulal pressure that i had not previously encountered, hence i lost a small pin from the inside of the adapter. Contacted customer services and they were superb, so happy to recommend on this fact alone. On proper installation, the adapter read more... Robust and simple enough to use if you follow the instructions. I adopted bad practice from an old system and incurred a problem when dissassembling due to a residulal pressure that i had not previously encountered, hence i lost a small pin from the inside of the adapter. Contacted customer services and they were superb, so happy to recommend on this fact alone. On proper installation, the adapter worked perfect with no problems.
Richard W. Verified Buyer 10th Feb 2019
Perfect fit for allowing connection to my backup disposable cylinder Perfect fit for allowing connection to my backup disposable cylinder
Massimo V. Verified Buyer 3rd Jan 2019
This small and precious gadget screwed on the outlet of the charging adapter allows the refilling of cylinders with M10x1 connection. It is also flared to be able to be tightened with a suitable key. Excellent and unobtainable. It is part of a kit, together with the replacement gaskets and the charging adapter. The individual pieces say little but the synergy and the work they do together is of first read more... This small and precious gadget screwed on the outlet of the charging adapter allows the refilling of cylinders with M10x1 connection. It is also flared to be able to be tightened with a suitable key. Excellent and unobtainable. It is part of a kit, together with the replacement gaskets and the charging adapter. The individual pieces say little but the synergy and the work they do together is of first order for those who are passionate. Lovely.
Graham O. Verified Buyer 19th Dec 2018
Again how do you rate performance of a pice of metal Again how do you rate performance of a pice of metal
Mr P. Verified Buyer 20th Oct 2018
Very good quality just make sure not to over tighten. Very good quality just make sure not to over tighten.
See more reviews  Loading
Side view of Disposable CO2 cylinder Adapter
click image to view full screen

Photo Gallery

Cart Activity

Someone added a product to their cart

View Product

Someone added a product to their cart

View Product