Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Free Returns
100% Satisfaction Guaranteed
Lifetime Support
With Extended Warranties
Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Lifetime Support
With Extended Warranties
 
Home > CO2 Regulators > Single Stage With Solenoid > CO2 Regulator With Solenoid & Dual Gauges For Horizontal Cylinder Valves

CO2 Regulator With Solenoid & Dual Gauges For Horizontal Cylinder Valves

£68.99

System Customisation

Update Cart
 
 

Key Facts

  • High quality design and manufacture.
  • For use with CO2 cylinders with horizontal valve orientation or our range of 'Advanced' adapters.
  • Dual pressure gauges indicating cylinder pressure and output working pressure.
  • Solenoid magnetic valve allows for CO2 to be switch on/off at defined times.
  • Output pressure set to 3 bar, suitable for aquariums 80L - 500L.
  • Precision needle valve.
  • Industry standard nut, compatible with DIN 477 / BS 341 No. 8 / JIS m22-14 / W21.8-14 / .860" x 1/14 (covers UK, Europe and Asia).
  • Works with any CO2 diffuser.
  • Choice of plug and voltage.

Description

The regulator is designed to reduce the high pressure inside of a CO2 cylinder to a lower, usable pressure that can be utilised for aquaria.

During photosynthesis, plants use carbon dioxide and water, combined with light energy, to produce oxygen and sugars. However, during dark hours, plants stop photosynthesising and converting CO2 to O2, and therefore it is not advised to add CO2 to the aquarium as levels may rise to the point where is causes distress to your fish. The in-built solenoid magnetic valve enables you to configure the required times for CO2 release, for example, configuring it 'on' during the 'lights on' and 'off' during 'lights out' hours. This can be achieved with a mains timer plug or pH controller. You can also choose to upgrade to a 12v DC solenoid (mains transformer included), which provides safe, low temperature, and guaranteed no noise operation.

Instructions

  • Tighten nut to CO2 cylinder or adapter using appropriate sized wrench or spanner (do not attempt to hand-tighten).
  • Fully open the needle valve by turning anti-clockwise, and switch the solenoid on. This will reduce the initial pressure surge on the pressure gauges when the CO2 cylinder valve is opened.
  • Open flow of CO2 on the cylinder.
  • Turn solenoid off and close needle valve by turning fully anti-clockwise.
  • Connect your bubble counter or tubing to the regulator.
  • Turn solenoid on and begin flow of CO2 by turning the needle valve anti-clockwise.
  • Allow a couple of minutes for pressure to build in the tubing and diffuser.
  • Adjust needle valve until desired bubble rate is achieved.
  • Click here to read the full regulator setup guide
 

Customer Reviews

Average Rating

Individual Reviews

Gary H. Verified Buyer 15th May 2019
Arrived super fast well packaged and easy to set up and a very good price well pleased, I won’t be shopping anywhere else in the future Arrived super fast well packaged and easy to set up and a very good price well pleased, I won’t be shopping anywhere else in the future
Phil N. Verified Buyer 26th Mar 2019
I was sceptical at first because of the price difference between that of my local fish keepers and CO2 supermarket, but I took the chance and found CO2 supermarket to be the ideal place to buy any products regarding the aquarist hobby. The CO2 regulator and solenoid I received appears high quality and I have no doubts that it will perform well for a long time to come. I was sceptical at first because of the price difference between that of my local fish keepers and CO2 supermarket, but I took the chance and found CO2 supermarket to be the ideal place to buy any products regarding the aquarist hobby. The CO2 regulator and solenoid I received appears high quality and I have no doubts that it will perform well for a long time to come.
Gareth M. Verified Buyer 23rd Mar 2019
Does the job have a little trouble at the start. Was using it on the new style of co2 extinguisher "small fat model" and the threads were too short and the regular spinned and wobbled tried it on the tall model extinguisher and fitting fine. So will need to get another washer to fit it to the other version Does the job have a little trouble at the start. Was using it on the new style of co2 extinguisher "small fat model" and the threads were too short and the regular spinned and wobbled tried it on the tall model extinguisher and fitting fine. So will need to get another washer to fit it to the other version
Leclercq F. Verified Buyer 11th Feb 2019
Sending very fast, ease of implementation thanks to the tutorial. I connected it on a fire extinguisher and it works very well. Thank you Co2 supermarket. Sending very fast, ease of implementation thanks to the tutorial. I connected it on a fire extinguisher and it works very well. Thank you Co2 supermarket.
Emanuel B. Verified Buyer 17th Dec 2018
Great and easy product Great and easy product
Derek C. Verified Buyer 31st Oct 2018
Seems well made and easy to fit but only time will tell. Seems well made and easy to fit but only time will tell.
Robin W. Verified Buyer 10th Jun 2018
Neat bi of kit and to overly space invasive. Advise you get an extention tube if linking to a distributor so it clears the cylinder handle and safety guard Neat bi of kit and to overly space invasive. Advise you get an extention tube if linking to a distributor so it clears the cylinder handle and safety guard
Marshall F. Verified Buyer 30th May 2018
Brilliant product well worth investing in. Performs flawlessly day after day. Brilliant product well worth investing in. Performs flawlessly day after day.
Brian R. Verified Buyer 13th May 2018
A well made regulator I have mine attached to a 2k fire extinguisher. Some great tutorials for this and other co2 items on the website A well made regulator I have mine attached to a 2k fire extinguisher. Some great tutorials for this and other co2 items on the website
Morgan M. Verified Buyer 11th May 2018
I've been using this for a few months now and it's worked flawlessly in that time. I can highly recommend it to anyone looking for a single stage regulator. I've been using this for a few months now and it's worked flawlessly in that time. I can highly recommend it to anyone looking for a single stage regulator.
See more reviews  Loading
Dual gauge CO2 regulator attached to cylinder
click image to view full screen

Photo Gallery

Cart Activity

Someone added a product to their cart

View Product

Someone added a product to their cart

View Product