Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Free Returns
100% Satisfaction Guaranteed
Lifetime Support
With Extended Warranties
Free UK Shipping
On Orders £30+. Next Day on Orders £80+
Same Day Dispatch
Weekday Orders Placed Before 3pm
Lifetime Support
With Extended Warranties
Home > CO2 Diffusers > Bazooka Atomizer CO2 Diffusers > Bazooka Atomizer CO2 Diffuser - 60mm For Aquariums Up To 200l

60mm Bazooka Atomizer CO2 Diffuser For Aquariums Up To 200L

£25.49
Bazooka Atomizer CO2 Diffuser - 60mm for Aquariums up to 200L
Sorry, out of stock Notify me when it's in stock
 
 

Key Facts

  • Highly efficient CO2 diffuser.
  • Produces a haze of incredibly small bubbles.
  • Easy to install.
  • This 60mm variety recommended for aquariums up to 200L.
  • Requires 3 bar / 40 PSI pressure to function (provided by all CO2 Supermarket regulators).

Description

The bubbles produced by a Bazooka Atomizer Diffuser are incredibly small (hence the word 'atom' in the product name) and appear almost as a smoke or haze as they exit the diffuser. These incredibly fine bubbles have a much increased surface area compared to one large bubble, and are therefore more readily diffused into the aquarium water.

Using a high quality diffuser, such as the bazooka atomizer, you will find that you can lower your CO2 dosing (bubble count) because a higher level of CO2 diffusion is achieved. This will reduce your running cost because your CO2 cylinder will last longer.

Furthermore, if you position the diffuser under the outflow from the filter then the small bubbles will get caught in the current and remain in suspension longer, thereby giving more time for the CO2 bubbles to diffuse into the aquarium water.

Instructions

  • Unscrew the compression collar and feed tubing through.
  • Push tubing onto inlet of the bazooka diffuser.
  • Using manual force (no tools), tighten the compression collar over the tubing.
  • Press the diffuser onto your aquarium glass using the suction cups.
  • Tip: Position just above substrate below the filter outflow. This will ensure the bubbles enter the flow of water from the filter and hold the CO2 in suspension for longer, increasing CO2 diffusion levels.
  • Tip: If using Polyurethane tubing, warm the tip of the tubing in freshly boiled water to soften it when attaching to the diffuser. This will remove the possibility of any accidental damage.
 

Customer Reviews

Average Rating

Individual Reviews

Carl W. Verified Buyer 5th Nov 2019
As described, nice atomizer As described, nice atomizer
Thomas S. Verified Buyer 31st Mar 2019
Works great! I’d buy it again Works great! I’d buy it again
Frank K. Verified Buyer 18th Feb 2019
Works well producing a fine mist of bubbles when input pressure set to 35 psi Works well producing a fine mist of bubbles when input pressure set to 35 psi
Derek C. Verified Buyer 31st Oct 2018
Perhaps not as attractive as some but really diffusers microscopic bubbles. Perhaps not as attractive as some but really diffusers microscopic bubbles.
Stylianos K. Verified Buyer 6th Oct 2018
Excellent product, with no problems Excellent product, with no problems
Alan G. Verified Buyer 18th Sep 2018
Really good diffuser and creates very small bubbles for excellent diffusion. Really good diffuser and creates very small bubbles for excellent diffusion.
Sanjin M. Verified Buyer 23rd Jul 2018
Marvelous atomizer. Very tiny bubbles. My plants are enjoying it, as weel as am I. Marvelous atomizer. Very tiny bubbles. My plants are enjoying it, as weel as am I.
Robin W. Verified Buyer 10th Jun 2018
Does a job but suckers only allow sticking to horizontal plane in order to get bubbles long the length of it go up Does a job but suckers only allow sticking to horizontal plane in order to get bubbles long the length of it go up
Charles G. Verified Buyer 3rd Feb 2018
The set up videos are very helpful The set up videos are very helpful
Steve C. Verified Buyer 1st Jan 2018
Avoid like the plague .......first one failed after 3 weeks ( no bubbles unless Pressure was maxed out ) and after a lot of emails !! a replacement was dispatched now a further 4 weeks on the second one has failed , leaking from around the seal on the ceramic tube , so much so I can hear the bubbles from another room !!. Wouldn’t stop me buying from CO2 supermarket but I won’t use the Bazooka again........ Avoid like the plague .......first one failed after 3 weeks ( no bubbles unless Pressure was maxed out ) and after a lot of emails !! a replacement was dispatched now a further 4 weeks on the second one has failed , leaking from around the seal on the ceramic tube , so much so I can hear the bubbles from another room !!. Wouldn’t stop me buying from CO2 supermarket but I won’t use the Bazooka again........
See more reviews  Loading
Photo of 60mm Bazooka Atomizer for planted aquariums
click image to view full screen

Photo Gallery

Cart Activity

Someone added a product to their cart

View Product

Someone added a product to their cart

View Product